How to Remove Water Softener? (Quick & Easy Steps) (2023)

Water softeners improve the quality of hard water so that it is safer to drink and use for household cleaning and laundry. These compounds, when dissolved in water, can leave stains behind that harm washers and faucets. You only need a few tools to “remove water softener” if it has to be serviced or repaired.

Water Softening: What is It?

Hard water is described as having a high concentration of calcium and magnesium. Water absorbs calcium and magnesium, two minerals that make water hard, as it passes through underground rocks and enters our streams.

Contrarily, soft water is water that has been “softened” through treatment using a home water softening system or is naturally soft due to low amounts of hardness minerals. The process of “water softening” involves removing the ions, typically calcium and magnesium ions, that make water “hard.”

How Do Household Softeners Function?

Ion exchange units, often known as home water softeners, are devices that take out calcium, magnesium, and other minerals from drinking water. The calcium and magnesium are trapped by resin beads inside the softener, which then convert them to sodium or potassium.

Once the resin beads are loaded with calcium and magnesium, the calcium and magnesium are removed from the beads using a potassium or salt solution with a high concentration. The chloride solution that results after going through the beads is a waste stream that eventually enters the environment after going down the drain.

How to Remove Water Softener? (Quick & Easy Steps) (1)

Why do We Use Water Softening?

A vital step in preventing the detrimental consequences of hard water is water softening.

The likelihood of limescale buildup in domestic water systems is increased by hard water. Pipes become obstructed as a result of this limescale buildup, which also lowers the efficiency of hot boilers and tanks. This raises the price of heating water and raises utility costs. A further drawback of limescale is the harm it does to home appliances like dishwashers and washing machines.

You won’t have to be concerned about increasing energy bills due to poor appliance operation or high repair costs because of softer water. Your clothes will last longer, your detergents will function more efficiently, and your skin will feel softer and smoother after a shower or bath!

What Advantages Can Water Softeners Offer?

The buildup that is currently in your pipes won’t be quickly cleared out by installing a water softener. Mineralization accumulation causes clogs in pipes to form over a long period of time. Hard water will gradually clog your pipes more severely if you keep using them.

Installing a water softening system can prevent scale buildup from hard water residuals from clogging your pipes. As your pipes are regularly flushed with softer water, the limescale will gradually start to disappear.

Installing a water softener can address numerous other problems in addition to halting and gradually reversing the accumulation of minerals lining the walls of your pipes. It is capable of the following, for example.

  • Give you crystal-clear dishes, glassware, and silverware.
  • Assist you in cleaning dishes with less dishwashing soap or detergent.
  • To make your clothes last longer and look and feel better, clean them.
  • Assist you in cleaning garments with less detergent.
  • Leave your skin and hair cleaner and healthier.
  • Reduce lingering, unsightly residue and equipment damage in the kitchen, bathroom, and other areas.

How to Remove Water Softener?

Step 1 is to Gather your Materials

Gather the equipment and materials you’ll need for the project before you begin. A big bucket, a towel, slide joint pliers or a wrench, and a screwdriver is a few examples.

Step 2: Turn Off the Water Supply or Find Another Way to Get Water

The water supply to the water softener must then be turned off. The valve should typically be twisted clockwise to turn off the water.

Step 3 is to Unplug the Device

Pull the plug out of the wall if your water softening system is plugged into an electrical outlet to turn off the power. You are now prepared to proceed to the following stage because the softener is now isolated from your water and electricity supplies.

Drain the Water Softener in Step Four

The water should then be drained from the system. When a softener is working, water is kept in the brine tank, where it combines with salt to create a brine solution.

Step 5: Cut the Output Pipe Loose

You can disconnect the outlet pipe after draining your salt tank of as much water as you can. Put a towel or a bucket under the connection before you begin to catch any leaks. The coupling that connects the softener to the supply pipe can be loosened using a wrench or slip joint pliers.

Step 6 is to Disconnect the Drain Line and Intake Pipe

Repeat the process on the softener’s opposite side to detach the inflow pipe. To clean up any water that has been spilled, use a towel or a bucket. Disconnect the drain line if it is attached to a waste system or drain pipe.

Step 7: Take Out the Last Bolts and Connectors

Please remove any remaining straps, connectors, or bolts holding the softener where it was initially put.

The softener should now be unplugged.

What Harm does Home Softening Do to One’s Health?

When a water softener uses salt, or sodium chloride, the amount of sodium in the water you drink at home rises. The calcium, iron, and magnesium that are lost during softening are not toxic and could even be good sources of nutrients for the body. You might need to eat more of them if they are taken out of your water.

How to Remove Water Softener? (Quick & Easy Steps) (2)

What Effects does Home Softening have on the Environment?

Chloride in the water is becoming an increasing issue in Minnesota. Our freshwater fish and other aquatic creatures are threatened by chloride in the water. The drinking water might be impacted by the chloride present in residential water softeners. Five gallons of water can be irreversibly contaminated with just one teaspoon of salt that contains sodium chloride. There is no simple way to get salt out of the water once it is there.

Home water softeners in some neighborhoods drain to municipal wastewater treatment facilities, which are not built to remove chloride. After going through the treatment facility, the chloride is released into our lakes and streams. Chloride drains from residences with private wells and home softeners to the septic system before entering lakes and streams.


Q: Do We Need Water Softeners?

A: Your skin and hair will benefit greatly from soft water, which also counteracts the drying effects of hard water. Aside from extending the life of your clothes and appliances, water-softening systems can save you money on energy and home heating.

Q: What Drawbacks does Soft Water Have?

A: The main drawback of water softening is that it may pose health hazards to those who follow low-sodium diets. For every GPG of hardness eliminated, salt is added in exchange for hardness minerals at a rate of 7.5 milligrams per quart. The homeowner also cuts off calcium and magnesium from their diet.

Q: What is the Lifespan of a Water Softener?

A: Depending on the brand and quality you choose, water softeners can last 10 to 20 years. A Kinetico system can last up to 20 years, compared to the typical lifespan of a single-tank electric water softener, up to 12 years.

Video CreditsHarvey Water Softeners

You May Also Like



How do I remove my water softener? ›

To remove a water softener, turn off the water supply and the electricity, then drain the softener and disconnect the inlet and outlet pipes from your plumbing. You can then dispose of the softener with a local company or recycle the parts that can be recycled.

Can you just unplug your water softener? ›

How do you turn off a water softener? Typically, all you have to do it turn the water softener bypass valve. For added peace of mind, you can also unplug the machine as well as shut off the main valve to your home. Your owner's manual, will be able to guide you helpfully through the process.

How do you remove hardened salt water softener? ›

Remove a Salt Bridge in 7 Steps
  1. Turn off the water supply to your softener. ...
  2. Locate a long tool you can use to break up the salt bridge. ...
  3. Insert the end of the handle in the brine tank and use it to chip away at the salt crust. ...
  4. As you work, use something like a plastic container to scoop out salt chunks at the surface.
Jul 30, 2019

How do I move an old water softener? ›

This project falls within the abilities of do-it-yourselfers with adequate plumbing skills and tools.
  1. Disconnect the input pipe from the water softener. ...
  2. Disconnect the output pipe from the water softener. ...
  3. Move the water softener to the new location. ...
  4. Connect a pipe to the water input valve of the water softener.

What happens if I remove my water softener? ›

If you plan on removing the water softener, you have to connect the loop back so that the house will still get water. As water enters the house's plumbing, it is diverted into the softener and back out (except for the kitchen sink). When a softener is removed, there will be a void where the piping used to be.

Should you turn off water softener when water is off? ›

You do not need to turn off your water softener during periods away from the property. If no water is being used while you are away the water softener will not function anyway.

Do you push or pull a water softener bypass? ›

How to Operate a Button Bypass Valve
  1. Locate the bypass button.
  2. Firmly push in on the button until it goes all the way in. ...
  3. To re-active your softener, simply press the button in fully on the opposite side of your bypass valve.
Jun 23, 2020

What happens if you let the salt run out your softener? ›

If your water softener runs out of salt, then the softening resin will become saturated to the point that no ion exchange can take place. Thus, the calcium and magnesium minerals will remain in your water. Sometimes, the water softener tank may even overflow.

Does it hurt a water softener to run out of salt? ›

When the water softener runs out of salt, it can cause long term damage and harm your water fixtures. It can even result in tank overflowing. Although this is the most common example, water softening salts are used in many areas, from homes to industries.

How long can a water softener sit without being used? ›

If your water softener has been unused for longer than 7 days, you should manually initiate a regeneration cycle. This will ensure the ion exchange resin is properly charged and capable of softening the incoming water.

Where is the shut off valve on a water softener? ›

You'll find the bypass valves on the pipes coming out of the water softener.

How do you Unbridge a water softener? ›

Luckily, removing a water softener salt bridge can easily be done with the right steps.
  1. Step #1: Turn Off the Water, and Break the Crust. ...
  2. Step #2: Remove the Loose Pellets, and Hammer the Edges. ...
  3. Step #3: Vacuum Out the Water, and Turn Back on the Water.
Nov 2, 2020

What happens if I disconnect my water softener? ›

When you unplug a water softener, the softener will shut off. This means the water softener will stay in its current cycle and won't regenerate. Unplugging a water softener may also cause the control head to lose its settings for water hardness, regeneration time, and so on.

Do I still need a water softener? ›

If your water's hardness is greater than 7 grains per gallon or 120 mg/L, then you might need a water softener to ensure your appliances run well and to improve the taste, smell, or look of your water.

Is there water at the bottom of a water softener? ›

There will usually be several gallons of water in the bottom of the brine tank, but usually is never more than twelve inches high. Should your softener have water in the brine tank? Yes, it should, as long as it's a post-fill system.


Top Articles
Latest Posts
Article information

Author: Lilliana Bartoletti

Last Updated: 15/10/2023

Views: 6036

Rating: 4.2 / 5 (53 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Lilliana Bartoletti

Birthday: 1999-11-18

Address: 58866 Tricia Spurs, North Melvinberg, HI 91346-3774

Phone: +50616620367928

Job: Real-Estate Liaison

Hobby: Graffiti, Astronomy, Handball, Magic, Origami, Fashion, Foreign language learning

Introduction: My name is Lilliana Bartoletti, I am a adventurous, pleasant, shiny, beautiful, handsome, zealous, tasty person who loves writing and wants to share my knowledge and understanding with you.